Under får du veiledning om hvordan du klassifiserer og finner avfallskoder som beskriver avfallet ditt.

Klassifisere avfallet

For å klassifisere avfallet, må du finne Baselkoden og EAL som samsvarer med din avfallstype.

1. Sjekke om avfallet innholder helse- og miljøfarlige stoffer

Du har plikt til å undersøke om avfallet inneholder helse- og miljøskadelige kjemikalier. For å vurdere om du kan klassifisere avfallet som grønnlistet må du vite 

  • hvor avfallet stammer fra
  • om det er noe i produksjonsprosessen som gjør at det kan inneholde miljøgifter eller ha miljørisiko
  • om avfallet består av en fraksjon eller av blandinger av flere typer grønt avfall 

Er du i tvil om avfallet inneholder miljøgifter, må du innhente riktig kompetanse, eventuelt sende det til analyse.

Avfallet skal klassifiseres riktig i forhold til definisjoner og føringer gitt i avfallsregelverket. 

2. Finne riktig Baselkode

For å kunne klassifisere må du finne riktig Baselkode for avfallet ditt.

Vi har laget et utdrag over koder for grønnlistet avfall her:

Baselkodes

List of wastes subject to general information requirements laid down in artcle 18. 

GREEN’ LISTED WASTE) ( This list originates from the OECD Decision, Appendix 3.)

Regardless of whether or not wastes are included on this list, they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which

  • (a) increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or

  • (b) prevents the recovery of the wastes in an environmentally sound manner.

Part I

The following wastes will be subject to the general information requirements laid down in Article 18:

Wastes listed in Annex IX to the Basel Convention ( Annex IX to the Basel Convention is listed in this Regulation in Annex V, Part 1, List B).

▼M6

For the purposes of this Regulation:

  • (a) any reference to list A in Annex IX to the Basel Convention shall be understood as a reference to Annex IV to this Regulation;

  • (b) in Basel entry B1020, the term ‘bulk finished form’ includes all metallic non-dispersible (‘Non-dispersible’ does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids) forms of the scrap listed therein;

  • (c) Basel entry B1030 shall read: ‘Residues containing refractory metals’;

  • (d) the part of Basel entry B1100 that refers to ‘Slags from copper processing’ etc., does not apply and (OECD) entry GB040 in Part II applies instead;

  • (e) Basel entry B1110 does not apply and (OECD) entries GC010 and GC020 in Part II apply instead;

  • (f) Basel entry B2050 does not apply and (OECD) entry GG040 in Part II applies instead;

  • (g) the reference in Basel entry B3010 to fluorinated polymer wastes shall be deemed to include polymers and co-polymers of fluorinated ethylene (PTFE).

 

▼B

B1 Metal and metal bearing wastes

Metal and metal-alloy wastes in metallic, non-dispersible form:

B1010 Precious metals (gold, silver, the platinum group, but not mercury)

  • Iron and steel scrap
  • Copper scrap
  • Nickel scrap
  • Aluminium scrap
  • Zinc scrap
  • Tin scrap
  • Tungsten scrap
  • Molybdenum scrap
  • Tantalum scrap
  • Magnesium scrap
  • Cobalt scrap
  • Bismuth scrap
  • Titanium scrap
  • Zirconium scrap
  • Manganese scrap
  • Germanium scrap
  • Vanadium scrap
  • Scrap of Hafnium, Indium, Niobium, Rhenium and Gallium
  • Thorium scrap
  • Rare earths scrap
  • Chromium scrap

 

B1020 Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plate, beams, rods, etc.):

  • Antimony scrap
  • Beryllium scrap
  • Cadmium scrap
  • Lead scrap (but excluding lead-acid batteries)
  • Selenium scrap
  • Tellurium scrap

B1030 Refractory metals containing residues

B1031 Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in list A under entry A1050, Galvanic sludges.

B1040 Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous

B1050 Mixed non-ferrous metal, heavy fraction scrap, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics. Note that even where low level contamination with Annex I materials initially exists, subsequent processes, including recycling processes, may result in separated fractions containing significantly enhanced concentrations of those Annex I materials. 

B1060 Waste Selenium and Tellurium in metallic elemental form including powder

B1070 Waste of copper and copper alloys in dispersible form, unless they contain Annex I constituents to an extent that they exhibit Annex III characteristics

B1080 Zinc ash and residues including zinc alloys residues in dispersible form unless containing Annex I constituents in concentration such as to exhibit Annex III characteristics or exhibiting hazard characteristic. The status of zinc ash is currently under review and there is a recommendation with United Nations Conference on Trade and Development (UNCTAD) that zinc ashes should not be dangerous goods.

B1090 Waste batteries conforming to a specification, excluding those made with lead, cadmium or mercury

B1100 Metal-bearing wastes arising from melting, smelting and refining of metals:

  • Hard zinc spelter
  • Zinc-containing drosses:
    • Galvanising slab zinc top dross (>90 % Zn)
    • Galvanising slab zinc bottom dross (>92 % Zn)
    • Zinc die casting dross (>85 % Zn)
    • Hot dip galvanisers slab zinc dross (batch) (>92 % Zn)
    • Zinc skimmings

  • Aluminium skimmings (or skims) excluding salt slag
  • Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics
  • Wastes of refractory linings, including crucibles, originating from copper smelting
  • Slags from precious metals processing for further refining
  • Tantalum bearing tin slags with less than 0,5 % tin


B1110 Electrical and electronic assemblies:

  • Electronic assemblies consisting only of metals or alloys
  • Waste electrical and electronic assemblies or scrap (12)(including printed circuit boards) not containing components such as accumulators and other batteries included on list A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or not contaminated with Annex I constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) or from which these have been removed, to an extent that they do not possess any of the characteristics contained in Annex III (note the related entry on list A, A1180)—
  • Electrical and electronic assemblies (including printed circuit boards, electronic components and wires) destined for direct re-use (13) and not for recycling or final disposal (14)

B1115 Waste metal cables coated or insulated with plastics, not included in list A1190, excluding those destined for Annex IVA operations or any other disposal operations involving, at any stage, uncontrolled thermal processes, such as open-burning

B1120 Spent catalysts excluding liquids used as catalysts, containing any of:

Transition Metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) on list A

  • Scandium
  • Vanadium
  • Manganese
  • Cobalt
  • Copper
  • Yttrium
  • Niobium
  • Hafnium
  • Tungsten
  • Titanium
  • Chromium
  • Iron
  • Nickel
  • Zinc
  • Zirconium
  • Molybdenum
  • Tantalum
  • Rhenium

  • Lanthanides (rare earth metals):
    • Lanthanum
    • Praseodymium
    • Samarium
    • Gadolinium
    • Dysprosium
    • Erbium
    • Ytterbium
    • Cerium
    • Neodym
    • Europium
    • Terbium
    • Holmium
    • Thulium
    • Lutetium

B1130 Cleaned spent precious-metal-bearing catalysts

B1140 Precious-metal-bearing residues in solid form which contain traces of inorganic cyanides

B1150 Precious metals and alloy wastes (gold, silver, the platinum group, but not mercury) in a dispersible, non-liquid form with appropriate packaging and labelling

B1160 Precious-metal ash from the incineration of printed circuit boards (note the related entry on list A, A1150)

B1170 Precious-metal ash from the incineration of photographic film

B1180 Waste photographic film containing silver halides and metallic silver

B1190 Waste photographic paper containing silver halides and metallic silver

B1200 Granulated slag arising from the manufacture of iron and steel

B1210 Slag arising from the manufacture of iron and steel including slags as a source of TiO2 and Vanadium

B1220 Slag from zinc production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301) mainly for construction

B1230 Mill scaling arising from the manufacture of iron and steel

B1240 Copper oxide mill-scale

B1250 Waste end-of-life motor vehicles, containing neither liquids nor other hazardous components

B2 Wastes containing principally inorganic constituents, which may contain metals and organic materials

B2010 Wastes from mining operations in non-dispersible form:

  • Natural graphite waste
  • Slate waste, whether or not roughly trimmed or merely cut, by sawing or otherwise
  • Mica waste
  • Leucite, nepheline and nepheline syenite waste
  • Feldspar waste
  • Fluorspar waste
  • Silica wastes in solid form excluding those used in foundry operations

B2020 Glass waste in non-dispersible form:

  • Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses

B2030 Ceramic wastes in non-dispersible form:

  • Cermet wastes and scrap (metal ceramic composites)
  • Ceramic based fibres not elsewhere specified or included

B2040 Other wastes containing principally inorganic constituents:

  • Partially refined calcium sulphate produced from flue-gas desulphurisation (FGD)
  • Waste gypsum wallboard or plasterboard arising from the demolition of buildings
  • Slag from copper production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301 and DIN 8201) mainly for construction and abrasive applications
  • Sulphur in solid form
  • Limestone from the production of calcium cyanamide (having a pH less than 9)
  • Sodium, potassium, calcium chlorides
  • Carborundum (silicon carbide)
  • Broken concrete
  • Lithium-Tantalum and Lithium-Niobium containing glass scraps
  •  

B2050 Coal-fired power plant fly-ash, not included on list A (note the related entry on list A, A2060)

B2060 Spent activated carbon not containing any Annex I constituents to an extent they exhibit Annex III characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on list A A4160)

B2070 Calcium fluoride sludge

B2080 Waste gypsum arising from chemical industry processes not included on list A (note the related entry on list A, A2040)

B2090 Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry)

B2100 Waste hydrates of aluminium and waste alumina and residues from alumina production excluding such materials used for gas cleaning, flocculation or filtration processes

B2110 Bauxite residue (red mud) (pH moderated to less than 11,5)

B2120 Waste acidic or basic solutions with a pH greater than 2 and less than 11,5, which are not corrosive or otherwise hazardous (note the related entry on list A, A4090)

B2130 Bituminous material (asphalt waste) from road construction and maintenance, not containing tar (the concentration level of Benzol[a]pyrene should not be 50mg/kg or more) (note the related entry on list A A3200)

B3 Wastes containn principally organic constituents, which may contain metals and inorganic materials 

B3010 Solid plastic waste:

The following plastic or mixed plastic materials, provided they are not mixed with other wastes and are prepared to a specification:

  • Scrap plastic of non-halogenated polymers and copolymers, including but not limited to the following (It is understood that such scraps are completely polymerised):
    • ethylene
    • styrene
    • polypropylene
    • polyethylene terephthalate
    • acrylonitrile
    • butadiene
    • polyacetals
    • polyamides
    • polybutylene terephthalate
    • polycarbonates
    • polyethers
    • polyphenylene sulphides
    • acrylic polymers
    • alkanes C10-C13 (plasticiser)
    • polyurethane (not containing CFCs)
    • polysiloxanes
    • polymethyl methacrylate
    • polyvinyl alcohol
    • polyvinyl butyral
    • polyvinyl acetate

  • Cured waste resins or condensation products including the following:
    • urea formaldehyde resins
    • phenol formaldehyde resins
    • melamine formaldehyde resins
    • expoxy resins
    • alkyd resins
    • polyamides
    •  

▼C3

The following fluorinated polymer wastes (post-consumer wastes are excluded from this entry, wastes shall not be mixed, problems arising from open-burning practices to be considered):

  • Perfluoroethylene/propylene (FEP)

▼C3

  • Perfluoro alkoxyl alkane
    • Tetrafluoroethylene/per fluoro vinyl ether (PFA)
    • Tetrafluoroethylene/per fluoro methylvinyl ether (MFA)
  • Polyvinylfluoride (PVF)
  • Polyvinylidenefluoride (PVDF)

▼B

B3020 Paper, paperboard and paper product wastes

  • The following materials, provided they are not mixed with hazardous wastes:
  • Waste and scrap of paper or paperboard of:
    • unbleached paper or paperboard or of corrugated paper or paperboard
    • other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass
    • paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)
    • other, including but not limited to
      1. laminated paperboard;
      2. unsorted scrap

▼M12

  • B3026 The following waste from the pre-treatment of composite packaging for liquids, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics:
    • Non-separable plastic fraction
    • Non-separable plastic-aluminium fraction

  • B3027 Self-adhesive label laminate waste containing raw materials used in label material production

▼B

  • B3030 Textile wastes

    The following materials, provided they are not mixed with other wastes and are prepared to a specification:
    • Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)
      • not carded or combed
      • other

    • Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock
      • noils of wool or of fine animal hair
      • other waste of wool or of fine animal hair
      • waste of coarse animal hair

    • Cotton waste (including yarn waste and garnetted stock)
      • yarn waste (including thread waste)
      • garnetted stock
      • other

    • Flax tow and waste
    • Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis sativa L.)
    • Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie)
    • Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave
    • Tow, noils and waste (including yarn waste and garnetted stock) of coconut
    • Tow, noils and waste (including yarn waste and garnetted stock) of abaca (Manila hemp or Musa textilis Nee)
    • Tow, noils and waste (including yarn waste and garnetted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included
    • Waste (including noils, yarn waste and garnetted stock) of man- made fibres
      • of synthetic fibres
      • of artificial fibres

    • Worn clothing and other worn textile articles
    • Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile
      • sorted
      • other

  • B3035 Waste textile floor coverings, carpets

  • B3040 Rubber wastes
    • The following materials, provided they are not mixed with other wastes:
      • Waste and scrap of hard rubber (e.g. ebonite)
      • Other rubber wastes (excluding such wastes specified elsewhere)

  • B3050 Untreated cork and wood waste:
    • Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
    • Cork waste: crushed, granulated or ground cork

  • B3060 Wastes arising from agro-food industries provided it is not infectious:
    • Wine lees
    • Dried and sterilised vegetable waste, residues and byproducts, whether or not in the form of pellets, or a kind used in animal feeding, not elsewhere specified or included
    • ►C4 Degras; residues resulting ◄ from the treatment of fatty substances or animal or vegetable waxes
    • Waste of bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised
    • Fish waste
    • Cocoa shells, husks, skins and other cocoa waste
    • Other wastes from the agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption

▼B 

  • B3065 Waste edible fats and oils of animal or vegetable origin (e.g. frying oils), provided they do not exhibit an Annex III characteristic

  • B3070 The following wastes:
    • Waste of human hair
    • Waste straw
    • Deactivated fungus mycelium from penicillin production to be used as animal feed

  • B3080 Waste parings and scrap of rubber

  • B3090 Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on list A, A3100)

  • B3100 Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry on list A, A3090)

  • B3110 Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list A, A3110)

  • B3120 Wastes consisting of food dyes

  • B3130 Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides

  • B3140 Waste pneumatic tyres, excluding those destined for Annex IVA operations

B4 Wastes which may contain euther inorganic or organic constituens

  • B4010 Wastes consisting mainly of water-based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on list A, A4070)

  • B4020 Wastes from production, formulation and use of resins, latex, plasticisers, glues/adhesives, not listed on list A, free of solvents and other contaminants to an extent that they do not exhibit Annex III characteristics, ►C4 e.g. water-based, or glues based on casein, starch, dextrin, cellulose ethers, ◄ polyvinyl alcohols (note the related entry on list A, A3050)

  • B4030 Used single use cameras, with batteries not included on list A

Her er lenke til hele fordningen (grønnlistet avfall på side 101 - 110).

3. Finne EAL-kode og sjekke om avfallet tilfredsstiller kravene

Du kan søke etter avfallstyper og finne ut om avfallet tilfredsstiller kravene til grønnlistet avfall her 

Hvis, du er i tvil om hva slags grønnlistet avfall du har, kan du få hjelp til å klassifisere fra den danske veilederen

Er ikke avfallet i kategorien grønnlistet?

Hvis avfallet ikke tilfredsstiller kravene til grønnlistet avfall, må du eksportere det som meldepliktig avfall. Gå til

Vi genererer din PDF - vennligst vent

Dette kan ta litt tid